|Product code||SAP 01|
|More items available upon order||within 7 working days|
|Timeline for shipping||2 working day(s)|
SAP1 - Installation System
SAP is an installation system for ceramic, marble, granite and composite.
The SAP system is a three-part system comprising: cap, strap and a tool for setting.
SAP1 eliminates the height differences between the tiles, reduces the time of laying ceramic tiles and marble, reduces polishing of marble, keeps the tiles in place during the maturation of the glue, it is fast and simple to use.
Ideal for tiles and marble 60x60cm or larger with LEVELS OF thickness from 0,13” to 0,8”. ( 3,5 mm to 20 mm)
ON average, you need a minimum of 8 straps/caps per square meter for big sizes to 20 straps/cups per square meter with small tiles or heavy wall tiles.
While installing, insert the strap under the tile edges, sliding the straps base plate under the tile being installed, at least 2 per tile side, at about 5 cm from the corner. Once the cap and the strap are in place, install the other tiles that fit against the first tiles. After that is done, tighten the straps and caps with the installation gun (manual or ergonomic ) until tile is level with adjoining tiles.
After the mortar is set, remove the straps and caps by snapping the strap off at its breaking point. The cup can be reused dozens of times.
Registered users can share their experience with this product. Register to access all of the benefits reserved to registered users or click on login if you are already registered.